1. SUPERMAX 91001 : Press the menu key. Then
press 7799 code for biss key.
2. TECHOSAT 2000 ULTRA 1 : Simply press
menu button and press 5400.
3. STARSAT 9700 & 7979 : Simply press menu
keys on your remote control, then press 9999 for
biss key.
4. STARSAT 2000 HD ACE : Press f1 on your
remote control, then press 333 and biss key
menu will open.
5. SAMTEL 7000 HD: Simply press OK button,
then press "0" and entre your biss key.
6. EL 7999 HD: Press on Menu buttom on your
reomote control, then press "7777' four times on
your remote control and enter your biss key.
7. BISS CODE FOR STRONG DECODERS:-
Strong products such as SRT 4669XII, SRT
4669X, SRT 4920, SRT 4923, SRT 4922a , SRT
4950, SRT 4950M, SRT 4950H. Simply press
8280 on your remote control and a new screen
will pop up. Please, if after pressing, new screen
didn't show up, you have to activate the biss key
option first. At this point, press 6969 on your
remote control and you will be asked for a
password, simply press 6969 again on your
remote control. After that press 8280 to enter
the biss key path. But if biss key option have
been activated on your decoder already, then you
don't need to go through such a long process.
Simply follow this simple steps below:
- Select the channel you want to open.
- Press 8280 on your romote and press OK.
- The Biss Key menu will display.
- Enter your Key
- Press Exit to save setting.
8. BISS KEY CODE FOR QSAT DECODERS.
- press menu on remote contrtol.
- Enter default code which is usually "0000"
unless if change by you, then you can enter your
own code.
- Try to locate Xcam set up on your decoder.
- If Xcam set up not available or hinden, simply
press 1512 on remote control and Xcam set up
will pop up automatically. Please note that
before you press 1512, make sure you are in area
of your decoder where you see things like
"Preference, AV, Ethernet Config, PVR Config,
Multimedia setting etc.
9. ECHO STAR DECODERS.
- Press menu on your remote control.
- Select system settings
- Press the red button on your control
- Enter 2528
- Enter your keys.
- Press the Red button twice.
- Finally, press OK.
10. AlphaBox X4 decoder. Follow the following
procedure :
* Press the menu botton on your remote control.
* Locate settings
* On the setting Bar, enter 2778
* The access control option will display
* Clck or press OK on the Access Control
* Locate CONSTANT.CW Edit and press OK
* Input your biss key ( CAID:SERVICE ID: BISS
KEY )